Mid-Range Textured Blue ESD Matting

Description Mid-Range, Textured Blue ESD Matting with textured, scratch resistant surface. Available to order in full rolls or cut-sized mats. Made with a thick, synthetic rubber material, comprised of two layers: a static dissipative surface and black conductive backing. Ideal for electronics manufacturing environments, providing excellent static dissipation to ground for the safe handling of static sensitive components. The static dissipative surface of the mat is resistant to abrasion, heat, solders flux and most commonly used solvents. The mat’s black conductive backing provides a superior and consistent ground path to Earth. Certified for RoHS and REACH regulations and compliant according to IEC-61340-5-1 International Standard. Grey matting also available. Product Features of Textured Blue ESD Matting: Full roll size 1.2m wide x 10m long Standard roll sizes are 10m x 1.2m and 10m x 0.60 Colour: Blue Durable, synthetic rubber material, 2mm thick 2-layers: static dissipative top, conductive backing Typical resistance to ground = 106 – 108 ohms Scratch resistant, heat resistant and UV resistant Textured surface prevents the sliding of components Easy to clean with Staticide Mat and Table Top Cleaner Can be loose-laid at the workbench, no adhesives required Cleaning Guidance Dirt can act as an insulator, so regularly cleaning ESD mats is essential to ensure accurate resistivity testing, maintain original performance, and extend lifespan. We recommend using a mild, neutral cleaner free from alkali, ammonia, and restricted RoHS/REACH chemicals. Choose one that leaves no streaks or residue. Bondline supplies Staticide ESD mat and tabletop cleaner suitable for cleaning workstations, tabletops, and anti-static mats, including rubber and vinyl. You should avoid using any cleaner that contains alcohol in its ingredients, as this can dry out the mats, causing them to lose their static fighting abilities. You also shouldn’t use household multipurpose cleaners or any other cleaners not made especially for ESD mats, as they can damage the mat’s surface and compromise electrical properties. These include: IPA wipes, household disinfectants, and antibacterial products. ESD Mat Customisation Should you require a bespoke size or custom studding for your bench mat, please get in touch. Our mats can be cut to any size you require in-house by our team. This service is only available on request. Please note, all bespoke cut mat sizes will have a /-10% manufacturing tolerance dependent on size. To request this service, please contact our team on 44 (0)1793 511000 or send us an email to [email protected] with your bespoke requirements. Standards and Regulations Compliance: RoHS compliant European Conformity REACH compliant IEC-61340-5-1 / EN61340-5-1 / US ESD Associations ANSI S4.1 and S20.20 Please note: Images are for illustration purposes, colours may vary between different manufacturing batches. IPA wipes, normal cleaners, Dettol or general anti-bacterial products are NOT recommended be used for cleaning ESD mats.